Resizing LUNs for Xenserver SRs

Perform steps 2-7 on the Pool Master:

1. Extend the volume/LUN from the SAN management console

2.Execute the following command and note the uuid of the SR.

xe sr-list name-label=<your SR name you want to resize>

3.To get the device name (eg: PV /dev/sdj ) use:

pvscan | grep <the uuid you noted in the previous step>

4.Tell the serve to refresh the iscsi connection:

echo 1 > /sys/block/device/device/rescan (e.g. echo 1 > /sys/block/sdj/device/rescan)

5.Resize the volume

pvresize <device name> (eg: pvresize /dev/sdj )

6. Rescan the SR:

xe sr-scan <the uuid you noted in the previous step>

7. Verify that the XE host sees the larger physical disk:

pvscan | grep <the uuid you noted in step 2>

References: http://blogs.citrix.com/2011/03/07/live-lun-resize-on-xenserver/